طراحی و شبیه سازی لایه محافظ بدنه هواپیما در مقابل سلاح های لیزری با استفاده از ساختارهای کریستال فوتونیکی.

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشکده برق دانشگاه آزاد اسلامی واحد سنندج،سنندج، ایران

2 دانشکده برق، دانشگاه آزاد اسلامی واحد کرمانشاه، کرمانشاه، ایران

چکیده

استفاده از تکنولوژی های جدید در جنگهای الکترونیکی امری اجتناب ناپذیر است. یکی از سلاح های جدید در این زمینه لیزرها هستند. سلاح های لیزری با با هدایت پرتو لیزر و تمرکز آن برروی هدف باعث تخریب آن می شود. لیزر به معنی تقویت نور به روش گسیل القایی تابش است. در این تحقیق سعی شده است تا با بهره گیری از ویژگی های ساختارهای کریستال فوتونیکی و اتصال آن به بدنه جنگنده های هوایی توان تخریبی این دسته از سلاح ها به حداقل میزان خود برسد. به دلیل خاصیت شکاف باند فوتونی کریستال های فوتونیکی و ایجاد چندین موج بر در میله های عایق، نور فرودی لیزر منحرف شده و به درون موج برها هدایت شده و نور لیزر کمترین برخورد را با بدنه هواپیما دارد. ساختار از شبکه های شش وجهی ساخته شده است که کمترین میزان نشت نور از موج بر را دارد. ویژگی مهم دیگر ساختار پیشنهادی این است که تمام میله‌های دی‌الکتریک دارای شعاع یکسان هستند که این موجب آسان‌ترشدن طراحی و پیاده سازی می‌شود. .

کلیدواژه‌ها


عنوان مقاله [English]

Design and simulation of the protective layer of the fuselage against laser weapons using photonic crystal structures.

نویسندگان [English]

  • Farsad Heidari 1
  • Fariborz Parandin 2
1 Electrical Department, Azad university of Sanandaj, Sanandaj, Iran
2 Department of Electrical, Azad university of Kermanshah, Kermanshah, Iran
چکیده [English]

The use of new technologies in electronic warfare is inevitable. One of the new weapons in this field are lasers. Laser weapons destroy a target by directing a laser beam and aiming it at the target. Laser means light amplification by the method of inductive emission of radiation. In this paper, it has been tried to use the features of photonic crystal structures and connect it to the body of air fighters to reduce the destructive power of these weapons to its minimum level. Due to the property of the photonic band gap of photonic crystals and the creation of several waveguides in the dielectric rods, the incident light of the laser is deflected and directed into the waveguides, and the laser light has the least collision with the fuselage. The structure is made of hexagonal lattice, which has the lowest amount of light leakage from the waveguide. Another important feature of the proposed structure is that all the dielectric rods have the same radius, which makes the design and implementation easier..

کلیدواژه‌ها [English]

  • Photonic crystal
  • Optical wave
  • Photonic band gap
  • Laser weapon