نشریه علمی پژوهش های نوین در سامانه های دفاع الکترونیکی

نشریه علمی پژوهش های نوین در سامانه های دفاع الکترونیکی

تحلیل و اندازه‌گیری مشخصات الکترومغناطیسی پلیمر هادی بر زیرلایه پی‌وی‌سی با استفاده از روش خط انتقال موجبری

نوع مقاله : مقاله پژوهشی

نویسندگان
1 گروه مخابرات، دانشکده مهندسی برق، دانشگاه علوم و فنون هوایی شهید ستاری
2 دانشکده مهندسی برق- دانشگاه علوم وفنون هوایی شهید ستاری- تهران- ایران
10.22034/joeds.2025.514295.1089
چکیده
در این مقاله با استفاده از روش خط انتقالی در موجبر مستطیلی، مشخصات الکترومغناطیسی نظیر ضریب گذردهی الکتریکی و رسانایی برای یک پلیمر هادی لایه ‌نشانی ‌شده بر زیرلایه عایق پی‌وی‌سی اندازه‌گیری و استخراج شده است. ابتدا مقادیر پارامترهای پراکندگی ماده در ساختار موجبر اندازه‌گیری شده و سپس با تحلیل نتایج از دو روش غیرخطی حداقل مربعات و روش مستقل از دقت کالیبراسیون مشخصات الکترومغناطیسی ماده استخراج گردید. نتایج اندازه‌گیری با هر دو روش در باند 5 تا 15 گیگاهرتز از تطابق خوبی برخوردارند. مقادیر بدست آمده برای پلیمر هادی ارایه شده می‌تواند در ساخت ساختارهای فرامواد منعطف در کاربردهای مختلفی نظیر سطوح غیرمسطح کاهنده سطح مقطع راداری مورد استفاده قرار گیرند. همچنین در این تحقیق روش استفاده شده که می‌تواند بر مشکل لزوم قرارگیری نمونه دقیقا در وسط موجبر فایق آید و محل قرار‌گیری ماده نمونه در هرکجای موجبر مستطیلی که باشد مشکلی ایجاد نکند. این روش می‌تواند ضمن ساده‌سازی اندازه‌گیریُ درجه آزادی جدیدی برای آزمایش نمونه در نقاط مختلف موجبر ایجاد کند.
کلیدواژه‌ها

عنوان مقاله English

Analysis and measurement of electromagnetic characteristics of conductive polymer on PVC substrate using the waveguide transmission line method

نویسندگان English

میقانی Mighani 1
Ebrahim Chegini 2
1 Electrical Engineering Department, Shahid Sattari Aeronautical University of Science and Technology, Tehran, Iran
2 Electrical Engineering Department, Shahid Sattari Aeronautical University of Science and Technology, Tehran, Iran.
چکیده English

In this paper, using the rectangular waveguide transmission line method, electromagnetic characteristics such as permittivity and conductivity for a conductive polymer deposited on PVC insulator substrate have been measured and extracted. First, the values of the dispersion parameters of the material in the waveguide structure have been measured and then, by analyzing the results from two nonlinear least square methods and a method independent of the calibration accuracy, the electromagnetic characteristics of the material in question have been extracted. The measurement results in the 5 to 15 GHz band are in good agreement with both methods. The results can be used in the construction of flexible metamaterial structures in various applications such as non-planar surfaces that reduce the radar cross-section of targets. In this paper, a new method is introduced that overcomes the problem of having to place the sample exactly in the middle of the waveguide and allows the sample material to be placed anywhere in the rectangular waveguide. This method can simplify the measurement and create a new degree of freedom for measuring the sample at different points in the waveguide.

کلیدواژه‌ها English

waveguide transmission line method
permittivity
permeability
conductive polymer