نشریه علمی پژوهش های نوین در سامانه های دفاع الکترونیکی

نشریه علمی پژوهش های نوین در سامانه های دفاع الکترونیکی

طراحی سیگنال فریب مجموع چیرپ، به منظور اخلال فریبنده در رادار با معیار بهینه نسبت توان حداکثر به توان متوسط

نوع مقاله : مقاله پژوهشی

نویسندگان
1 دانشکده مهندسی برق، دانشگاه جامع امام حسین (ع)، تهران، ایران
2 دانشکده برق - دانشگاه امیرکبیر- تهران- ایران
3 دانشکده مهندسی برق و کامپیوتر، دانسگاه جامع امام حسین (ع)، تهران، ایران
10.22034/joeds.2025.486749.1068
چکیده
با تولید سیگنال‌های کاذب توسط جمرهای فریبنده خودی و ارسال آن به سمت رادارهای دشمن، می‌توان رادار را فریب داده و اهداف خودی که در محدوده دید رادار قرار دارند را از دید رادار محو نمود. به همین منظور، جمر فریبنده، سیگنال رادار دشمن را دریافت نموده و بعد از اعمال شیفت فرکانسی و شیفت زمانی مناسب بر روی آن، توسط سیستم DRFM واقع بر روی جمر و ارسال مجموعه‌ای از این سیگنال‌های جعلی به سمت رادار دشمن، آن‌را را فریب می‌دهد. حال مسئله اساسی در این روش این است که فاصله شیفت زمانی و شیفت فرکانسی مناسب برای ایجاد سیگنال‌های فریب چه مقدار باید باشد؟ اگر فاصله شیفت فرکانسی و زمانی کم باشد به این معنی است که باید تعداد سیگنال‌های فریب افزایش یابد که این حالت این مزیت را دارد که به راحتی می‌توان هدف خودی را از دید رادار دشمن پنهان نمود ولی این ایراد پیش خواهد آمد که مقدار PAPR سیستم افزایش یافته و بازده جمر کاهش می‌یابد، و اگر فاصله شیفت فرکانسی و زمانی افزایش یابد، به این معنا خواهد بود که تعداد سیگنال‌های جعلی کاهش می‌یابد، لذا این مزیت وجود دارد که مقدار PAPR افزایش نخواهد یافت ولی این ایراد وجود خواهد داشت که هدف خودی به راحتی از دید رادار دشمن پنهان نخواهد ماند. بنابراین باید فاصله شیفت فرکانسی و زمانی به گونه‌ای محاسبه گردد که هم معیار PAPR افزایش نیابد و هم اینکه هدف به راحتی از دیدی رادار دشمن پنهان گردد.
کلیدواژه‌ها

عنوان مقاله English

Total Chirp Deception signal design for the purpose of decoy interference in radar with the optimal ratio of maximum power to average power (PAPR)

نویسندگان English

kazem ghaffari 1
yaser norouzi 2
pouriya etezadifar 3
1 Electrical Eng, Imam Hossein University, Tehran, Iran
2 Electrical Eng , Amirkabir University, Tehran, Iran
3 Electrical & Computer Engineering, Imam Hussein Comprehensive University, Tehran, Iran
چکیده English

By producing false signals by self-deceptive jammers and sending them to the enemy's radars, it is possible to deceive the radar and hide the self-targets that are within the radar's range of vision. For this purpose, the deceptive jammer receives the enemy's radar signal and after applying the appropriate frequency shift and time shift on it, it deceives the radar by the DRFM system located on the jammer

and sending a set of these fake signals to the enemy's radar. . Now, the basic issue in this method is, what should be the appropriate time shift and frequency shift interval to create deception signals? If the frequency and time shift distance is small, it means that the number of decoy signals should be increased, which has the advantage that it is easy to hide the internal target from the enemy's radar, but the problem will be that the PAPR value of the system will increase. The search and efficiency of the jammer decreases, and if the frequency and time shift distance increases, because the number of fake signals decreases, so there is an advantage that the PAPR value will not increase, but there will be a problem that the internal target will not be easily hidden from the enemy's radar. stayed Therefore, the frequency and time shift distance should be calculated in such a way that both the PAPR criterion does not increase and the target is easily hidden from the enemy's radar.

کلیدواژه‌ها English

Deceptive jammer
PAPR
JSRmin
decoy signal
frequency shift
time shift